H ShockWave 2 Sound Systems - Model Sounds Inc. - The Ultimate in Radio Controlled Model Sound Systems
H

Sound Systems

Here are a selection of sound system kits to suit any size of R/C model. Installation is very easy and our excellent exciters require no holes to be made in your model.

What's New:

November 29, 2018

New Sikorsky CH-53E heavy lift helicopter sound set now available bringing our total helicopter sounds to 38!

November 28, 2018

New Sukhoi Su-57 (PAK T-50) airplane jet sound set now available bringing our total airplane sounds to 107!

November 19, 2019

New F22 Raptor jet airplane sound set now available bringing our total airplane sounds to 106!

November 09, 2018

P39 Airacobra sound set now available bringing our total aircraft sounds to 105!

July 03, 2018

The wordmark ShockWave is now an officially registered Trade Mark, registered with the United States Patent and Trademark Office.

ShockWave® 2 Sound Systems

Wiring Multiple loudspeakers

Quick-Start Guide

ShockWave 2-System 2 x 2 inch x 4 Ohm-Exciters
CONVENIENT INSTALLATION

Item Number : System-2x2x4EX
Voltage : 4.5 - 26 Volts (6S LiPo), 2Amps maximum.
Power Output : 40 Watts at 26 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
2 x 2inch 20Watt 4Ohm Exciters
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 200 grams (6.45oz)

USD$189.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install sound in your large or medium sized airplane, helicopter, boat or tank models. The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 4ft of red/black twisted wire is used for both exciters and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the exciters.

Recommended power supply - 6S LiPo.

This system uses two 2 inch holeless Exciters instead of conventional loudspeakers. Exciters work by vibrating the surface to which they are attached. They may be attached (using the self-adhesive double side tape ring) to the inside of your airplane/helicopter fuselage, boat or tank hull etc. without cutting holes for a conventional loudspeaker. They are small and light weight.

However, the sound they produce, both volume and tone, is variable and depends on the type of material to which they are attached. Factors such as type of material, (wood, fibreglass, foam etc.), stiffness, thickness, all play significant roles in determining the volume and quality of the sound.

Thinner, more flexible, materials will produce louder sound but will tend to emphasize the higher, treble frequencies. Thicker and stiffer materials will be quieter but will produce better low frequency bass sounds.

Dense aircraft foam between 3-6mm (about 1/8 inch to 1/4 inch) thick works well so try to find an area in your model that has this thickness.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 1 x 2 inch x 4 Ohm-Exciter
CONVENIENT INSTALLATION

Item Number : System-1x2x4EX
Voltage : 4.5 - 14 Volts (3S LiPo), 2Amps maximum.
Power Output : 20 Watts at 12 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
1 x 2inch 20Watt 4Ohm Exciter
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 200 grams (6.45oz)

USD$174.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install sound in your medium sized airplane, helicopter, boat or tank models. The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 4ft of red/black twisted wire is used for both exciter and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the exciter.

Recommended power supply - 6S LiPo.

This system uses one 2 inch holeless Exciter instead of a conventional loudspeaker. Exciters work by vibrating the surface to which they are attached. It may be attached (using the self-adhesive double side tape ring) to the inside of your airplane/helicopter fuselage, boat or tank hull etc. without cutting holes for a conventional loudspeaker. It is small and light weight.

However, the sound it produces, both volume and tone, is variable and depends on the type of material to which they are attached. Factors such as type of material, (wood, fibreglass, foam etc.), stiffness, thickness, all play significant roles in determining the volume and quality of the sound.

Thinner, more flexible, materials will produce more sounds and will tend to emphasize the higher, treble frequencies. Thicker and stiffer materials will be quieter but will produce better low frequency bass sounds.

Dense aircraft foam between 3-6mm (about 1/8 inch to 1/4 inch) thick works well so try to find an area in your model that has this thickness.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 2 x 4 inch x 4 Ohm
SUPERB SOUND QUALITY

Item Number : System-2x4x4
Voltage : 4.5 - 26 Volts (6S LiPo), 2 Amps maximum.
Power Output : 40 Watts at 26 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
2 x 4inch 20Watt 4Ohm Loudspeakers
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

6ft x Twisted red/black 22AWG wire
Weight : 400 grams (14.1oz)

USD$189.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install superb sound in your larger airplane, helicopter, boat or tank models.

While the exciters shown above are covenient, if you want the very best quality and most consistent R/C model sound available, you should use this system which comes with two 4 inch 20 Watt 4 Ohm conventional loudspeakers.

The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 6ft of red/black twisted wire is used for both loudspeaker and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the loudspeakers.

Recommended power supply - 6S LiPo.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 1 x 4 inch x 8 Ohm
EXCELLENT SOUND QUALITY

Item Number : System-1x4x8
Voltage : 4.5 - 21 Volts (5S LiPo), 2 Amps maximum.
Power Output : 20 Watts at 18 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
1 x 4inch 20Watt 8Ohm Loudspeaker
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 203 grams (7.2oz)

USD$174.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install superb sound in your medium sized airplane, helicopter, boat or tank models.

While the exciters shown above are covenient, if you want the very best quality and most consistent R/C model sound available for medium sized models, you should use this system which comes with one 4 inch 20 Watt 8 Ohm conventional loudspeaker.

The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 4ft of red/black twisted wire is used for both loudspeaker and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the loudspeaker.

Recommended power supply - 5S LiPo.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 1 x 4 inch x 4 Ohm
EXCELLENT SOUND QUALITY

Item Number : System-1x4x4
Voltage : 4.5 - 13 Volts (3S LiPo), 2 Amps maximum.
Power Output : 20 Watts at 13 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
1 x 4inch 20Watt 4Ohm Loudspeaker
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 203 grams (7.2oz)

USD$174.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install superb sound in your medium sized airplane, helicopter, boat or tank models.

While the exciters shown above are covenient, if you want the very best quality and most consistent R/C model sound available for medium sized models, you should use this system which comes with one 4 inch 20 Watt 4 Ohm conventional loudspeaker.

The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 4ft of red/black twisted wire is used for both loudspeaker and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the loudspeaker.

Recommended power supply - 3S LiPo.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 1 x 3.3 inch x 4 Ohm
GOOD SOUND QUALITY
SMALLER, WATERPROOF SPEAKER

Item Number : System-1x3x4
Voltage : 4.5 - 13 Volts (3S LiPo), 2 Amps maximum.
Power Output : 20 Watts at 13 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
1 x 3.3inch 20Watt 4Ohm Loudspeaker
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 290 grams (9.4oz)

USD$174.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install superb sound in your medium sized models. The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets.

A feature of this kit is the 3.3 inch loudspeaker with a waterproof cone making it ideal for model boats. This loudspeaker is heavier at 240 grams than our standard 4 inch model at 162 grams but can still be used in model aircaft where space is at a premium if the model's payload capacity is high enough. The 4ft of red/black twisted wire is used for both loudspeaker and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the loudspeaker.

Recommended power supply - 3S LiPo.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.

Quick-Start Guide

ShockWave 2-System 2 x 2 inch x 4 Ohm
GOOD SOUND QUALITY
SMALLEST LOUDSPEAKERS

Item Number : System-2x2x4
Voltage : 4.5 - 16 Volts (4S LiPo), 2Amps maximum.
Power Output : 20 Watts at 16 Volts
Contents :
1 x ShockWave 2 Sound Module
1 x Preloaded 8GB microSD Card
2 x 2inch 10Watt 4Ohm Loudspeakers
2 x Male-Male Servo Leads for one
throttle and one gun sound input.

4ft x Twisted red/black 22AWG wire
Weight : 285 grams (10.0oz)

USD$174.99

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

This top-of-the-line sound system kit contains everything you need to easily install superb sound in your smaller airplane, helicopter, boat or tank models. The ShockWave 2 sound module includes all our pre-configured Aircraft or Helicopter or Boat or Tank sound sets. The 4ft of red/black twisted wire is used for both loudspeaker and power connections. You will need to provide and solder battery connectors of your choice and solder the provided wires to the loudspeakers.

Recommended power supply - up to 4S LiPo.

Click on the links above for details of the individual components.

If you want to change any of the many configurable options or switch the sounds around or add or delete sounds yourself, you should purchase the optional Windows 10/Windows 8/8.1/Windows 7/Vista/XP SFXPC4 Software here.