2.0 inch (50mm) Loudspeaker

This small loudspeaker can be used in smaller models on up to 12 Volts with our ShockWave 2 Sound Module if the volume is reduced. Or use two in series up to 18 Volts at full volume.

What's New:

July 03, 2018

The wordmark ShockWave is now an officially registered Trade Mark, registered with the United States Patent and Trademark Office.

June 04, 2018

New Dominie 125 (Hawker Siddley 125) jet airplane sound set now available bringing our total airplane sounds to 104!

April 06, 2018

New Gloster Meteor airplane jet sound set now available bringing our total airplane sounds to 103!

February 24, 2018

New F4 Phantom airplane jet sound set now available bringing our total airplane sounds to 102!

February 21, 2018

HMS Hood sound set now available bringing our total boat sounds to 41!

2.0 inch (50mm) Loudspeaker

Name : 2.0 inch 10 Watt Loudspeaker - 4 Ohm - Set of two

Item Number : LS2.0IN-10W-4Ohm - Set of two
Size : 50mm x 50mm x 32mm (2.0" x 2.0" x 1.25")
Weight : 123 grams (4.3oz) Each
Frequency Response : 400–8000 Hz
Sensitivity : 90dB/1W/1m

USD$19.99 per set of two

Canadian and US Customers ONLY
can use the Add To Cart Button.
For all other countries please email us at contactus@modelsoundsinc.com for a shipping quote.

Sold in pairs, this little loudspeaker is only 50mm (2.0 inches) square, yet can handle 10 Watts each. It is intended for use with our ShockWave 2 sound module in smaller models on lower supply voltages (up to 12.0V) or up to 18Volts if two are wired in series. Its sensitivity is a very high 90dB/1W/1m so they play loud and are recommended for smaller airplanes of around 40 inch wingspan. However, due to its smaller size, its low frequency response is not as good as our larger 4 inch speakers so will not reproduce the low frequency rumblings of large piston engines as well.

It is also suitable for smaller helicopters, model boats or tanks.